超高效液相色谱法测定清咽糖中6种绿原酸类化合物的含量

目的建立超高效液相色谱法同时测定清咽糖中新绿原酸、绿原酸、隐绿原酸、3,4-O-二咖啡酰基奎宁酸、3,5-O-二咖啡酰基奎宁酸和4,5-O-二咖啡酰基奎宁酸6种绿原酸类化合物的含量。方法采用Agilent Eclipse Plus C18 RRHD色谱柱(2.1 mm×150 mm, 1.8μm),以乙腈、0.4%磷酸水溶液为流动相,梯度洗脱,流速0.8 mL/min,检测波长327 nm,柱温35℃。结果 6种成分在相应的线性范围内呈良好的线性关系。精密度、重复性、稳定性实验中6种成分峰面积的相对标准偏差均小于3.0%,平均加样回收率为93.77%～104.37%,相对标准偏差为0.28%～1.86%。结论该方法具有良好的专属性和重现性,加样回收率实验符合要求,结果准确、稳定,适用于同时测定清咽糖中新绿原酸、绿原酸、隐绿原酸、3,4-O-二咖啡酰基奎宁酸、3,5-O-二咖啡酰基奎宁酸和4,5-O-二咖啡酰基奎宁酸的含量。     

Effects of displays on a direct reaching task: A comparative study of head mounted display and stereoscopic widescreen display

This study was conducted to investigate the virtual display effects on direct interaction performance metrics such as accuracy, task completion time, and comfort. Eighteen participants performed tapping (pointing) tasks in the coronal plane by directly reaching for tapping targets at three egocentric distance levels, with three indices of difficulty at each egocentric distance. The position data and severity of cybersickness symptoms were collected with a motion system and a symptom questionnaire, respectively. The results indicated that accuracy was higher with the stereoscopic widescreen display than with the head mounted display. However, no significant differences in task completion time, throughput, and cybersickness were observed between the two VR displays. In addition, increasing the egocentric distance improved accuracy and lengthened the task completion time, whereas increasing the task difficulty lengthened the task completion time but did not affect the accuracy. The findings are important and informative for users in choosing between the two virtual reality displays. Generally, the stereoscopic widescreen display can be recommended for tasks requiring high egocentric distance accuracy in the coronal plane. Furthermore, developers may refer to these findings in designing interfaces that allow a more natural way of interaction for users.     

不同热解工艺下半焦的微观结构特点及其对燃烧性能的影响

摘要：对比研究了3种直立内热炉半焦(熄焦方式分别为水泡熄焦、喷水熄焦及烟气干熄焦)及一种流化床热解半焦的微观结构及燃烧性能。通过对半焦组成、孔隙结构、有机官能团、碳化学结构及半焦微晶结构分析，获得了不同低温热解工艺半焦的组成及微观结构特点，明确了组成及微观结构与燃烧性能之间的关系。结果表明，不同热解工艺半焦的组成和微观结构差异明显，其对半焦的燃烧性能影响显著。干熄焦碳化学结构缺陷比例大，快速热解半焦孔隙结构发0达、挥发分高，与水喷焦相比水泡焦石墨化程度低；水喷焦燃烧性能优于水泡焦，干法所得半焦的燃烧性优于湿法；半焦的挥发分含量决定其燃点，在快升温速率条件下孔隙结构对半焦的燃烧性能影响较大，而慢升温速率条件下有序化度对半焦的燃烧性能影响较大。     

CO2注入井封隔器早期密封失效机制研究

为了揭示CO_2注入井中性能优良的氢化丁腈橡胶封隔器早期密封失效的机制,根据失效井的特征分析以及CO_2的相态特点,提出实现恒定泄压速度的室内实验方法,并对不同CO_2泄压速度下橡胶表面进行形貌观测和力学性能测试分析。结果表明:随着泄压速度的增加,橡胶表面出现了小气泡、大气泡甚至气泡破裂等龟裂现象,橡胶的密封性能均明显变差;注气井突然泄压时,橡胶内部的气体在短时间内无法渗出,其在内外压差作用下会膨胀形成气泡甚至爆裂,这是造成CO_2注入井封隔器早期密封失效的主要原因。为了防止封隔器的早期密封失效,推荐现场井口泄压速度控制在5 MPa/h以内。     

APP软件性能效率研究

性能效率是APP软件的重要质量属性，但目前缺乏APP软件性能效率的通用模型。分析了APP软件的性能特征，基于ISO/IEC 25010标准提出了APP软件的性能效率模型，定义了APP软件性能效率的子特性和度量指标。基于提出的APP软件性能效率模型，通过实验对APP软件的性能效率进行了度量及相关分析。     

Business intelligence and analytics use,innovation ambidexterity,and firm performance: A dynamic capabilities perspective

To survive in a dynamic and hyper-competitive business environment, firms are compelled to simultaneously introduce incremental and radical innovations. While it is recognised that business intelligence and analytics (BI&A) can support innovation and provide organisational value, the literature provides a limited understanding of its impact on balancing different innovation activities and ensuring performance gains. In this study, we examine the relationship between BI&A use, innovation ambidexterity, and firm performance by relying on the process theory of IS value creation as well as the dynamic capabilities perspective. We test our model using data collected from medium- and large-sized firms in Slovenia, applying partial least squares modelling. The results support the notion that BI&A use is positively associated with successful balancing between explorative and exploitative innovation activities, which in turn enhances firm performance. Our results also indicate that innovation ambidexterity is enhanced in two ways: indirectly through interaction with the firm’s absorptive capacity, and directly by increasing the possibilities of faster experimentation with offerings of products or services and improved predictability of the value of new products or services.     

高效液相色谱法测定多环芳烃的出峰顺序探讨

目的探讨水﹑气﹑土壤中多环芳烃检测标准(HJ 478-2009﹑HJ 647-2013、HJ 784-2016)的正确出峰时间和顺序。方法用高效液相色谱来对苊烯、芴、苊、?、苯并(a)蒽进行定性分析,并与3个标准中的出峰顺序进行比较。结果苊烯、苊、芴、苯并(a)蒽、?的出峰时间分别为6.450、7.923、8.233、17.760、18.740min,与标准HJ478-2009﹑HJ647-2013的出峰顺序存在差异。结论在使用标准HJ478-2009﹑HJ647-2013、HJ 784-2016同时测定16种多环芳烃时,多环芳烃的出峰顺序及时间应以HJ 784-2016为准。     

硬质道路石油沥青关键组分的研制

筛选出适合制备硬质道路石油沥青关键组分的减压渣油，并以此为原料，考察了蒸馏深拔、深度氧化及溶剂脱沥青工艺制备的硬质道路沥青关键组分的性能。所制备的关键组分能够大幅提升基质沥青的高温性能，且通用性好；将关键组分与基质沥青按适合比例调合可以稳定生产高温性能好的硬质道路石油沥青，其混合料耐高温性能好。同时,为便于硬质沥青关键组分的使用,还开发了关键组分的造粒成型技术,提出其适于成型造粒的黏度范围为0.6～6 Pa?S。采用关键组分生产的硬质道路沥青用于高速公路实体工程，经过2年以上的气候和通车考验，沥青路面无车辙、无开裂，保持优良的使用性能。     

Numerical investigation of gelled crude oil particle melting in water for hydrogen production

This paper describes a numerical analysis of the melting process of gelled crude oil in water for hydrogen production. The melting characteristics of crude oil particles are analyzed, and the influence of flow velocity, particle radius, and hot water temperature on the melting process is discussed. The results indicate that the melting rate on the surface of the crude oil is different, the oil particles do not melt concentrically, and the monitoring points and rate of increase in temperature are not substantially affected by the phase change interval. The flow rate and particle radius are found to have a significant influence on the phase distribution of the oil droplets, but changes in water temperature have little effect. After validating a model of the melting process, we investigate the influence of oil particle size, water temperature, flow rate, and oil temperature. It is found that increases in water temperature and flow rate, or a decrease in oil particle size, tend to reduce the melting time.     

Multiple Chemical Features Impact Biological Performance Diversity of a Highly Active Natural Product-Inspired Library

A systematic, diversity-oriented synthesis approach was employed to access a natural product-inspired flavonoid library with diverse chemical features, including chemical properties, scaffold, stereochemistry, and appendages. Using Cell Painting, the effects of these diversity elements were evaluated, and multiple chemical features that predict biological performance diversity were identified. Scaffold identity appears to be the dominant predictor of performance diversity, but stereochemistry and appendages also contribute to a lesser degree. In addition, the diversity of chemical properties contributed to performance diversity, and the driving chemical property was dependent on the scaffold. These results highlight the importance of key chemical features that may inform the creation of small-molecule, performance-diverse libraries to improve the efficiency and success of high-throughput screening campaigns.